Operation Manual

30
ATV AND OTHER MODES
- Press SOURCE button on unit side or remote control to select preferred input source.
- For menu operations in above modes, please refer to the menu operations in DTV
mode.
PC MODE
- Power on your Personal Computer and connect it to this TV.
- Press SOURCE button on unit side or remote control to set the unit in PC mode.
- Press MENU button to display the main menu and use LEFT or RIGHT navigation
button to select PICTURE.
- Then press OK button and use UP or DOWN navigation button to select Screen.
- Press OK button again to enter submenu.
- Press UP or DOWN navigation button to select desired item.
- Press LEFT or RIGHT navigation button to adjust the value.
Auto Adjust
This item is used to adjust the value of screen automatically.
Horizontal Pos.
This item is used to adjust the value of horizontal position from 0-100.
Vertical Pos.
This item is used to adjust the value of vertical position from 0-100.
Size
This item is used to adjust the value of size from 0-100.
Phase
This item is used to adjust the value of phase from 0-100.
NOTE: The picture will shake with unsuitable phase setting.
For the PICTURE, SOUND, TIME, OPTION and LOCK menus, please refer to the menu
operations in DTV mode.