IMPORTANT INSTRUCTIONS SAFETY INSTRUCTIONS WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL INJURY: This product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Situate this product away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
CAUTION! TO REDUCE THE RISK OR PERSONAL INJURY OR PRODUCT/PROPERTY DAMAGE: This product is intended solely for non-commercial, non-industrial, personal use as a television. Do not use this product for any other purpose. Do not subject the product to violent shocks, extreme temperatures, or lengthy periods or direct sunlight. Keep the product away from magnetic objects, motors, and transformers. Do not use outdoors in inclement weather.
TABLE OF CONTENTS GETTING STARTED IMPORTANT INSTRUCTIONS ............................................................................................ 1 ACCESSORIES .................................................................................................................. 2 FEATURES ......................................................................................................................... 4 GENERAL PARTS ....................................................................................
FEATURES 54 cm (21.5") TFT DISPLAY This unit has a built-in 54 cm (21.5”) TFT display to provide clear vision and low radiation. AUTO TV SCANNING DIGITAL BROADCASTING RECEPTION (TVB-T & DVB-C) SUPPPORTS H.
GENERAL PARTS MAIN UNIT Front View 1. TFT display screen 2. Power indicator: In standby mode the indicator light will display red color; when switching on the unit the indicator light will display blue color. 3. Remote control sensor 4. Stand holder 5. VOLUME +/- button: To increase/decrease the volume level or move left/right. Back View 6. CHANNEL +/- button: To select next/ previous channel or move up/down. 7. MENU button: To enter menu setting page. 8. SOURCE button: To select the input source. 9.
Back View 1. POWER input 2. HDMI input terminals 3. VGA input terminal 4. PC AUDIO input terminal 5. COAXIAL output terminal 6. SCART input terminal 7. AV input terminal 8. YPbPr input terminal 9. RF input terminal - To connect the external antenna 10. EARPHONE output terminal 11. CI input terminal 12. USB input slot - For multimedia files playback 13.
REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. POWER: To set the unit in standby mode; press it again to switch it on. MUTE: To mute the sound. AUTO: To adjust the screen automatically (in PC/VGA mode). NUMBERIC BUTTONS (0-9): To input the number information, such as channel number and so on. -/--: To switch the digit. : To return to previous channel or input source.
30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 8 TV/RADIO: To switch the unit between TV and radio. INDEX: To enter index page. SIZE: To switch teletext size. SUBPAGE: To enter the subpage of teletext. REVEAL: To hide teletext, or display hidden characters. MEDIA: To enter MEDIA mode directly. : To play or pause playing. : To move fast forward. : To move fast backward. ● : RECORD (No function on this model) ■ : To stop playing. : To play next chapter. : To play previous chapter.
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1). SERVICE LIFE OF BATTERIES The batteries normally last for one year although this depends on how often the remote control is used. If the remote control fails to work even when it is operated near the player, replace the batteries. Use two size AAA dry batteries.
BASIC CONNECTION Ensure all the cables are disconnected from the main unit before connecting to AC power source. Read through the instructions before connecting other equipments. CONNECTING TO AC POWER SOURCE Main Unit To power outlet CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
HDMI CONNECTION Use HDMI cable (not included) to connect the unit with other devices to receive high-definition multimedia signal. HDMI cable (Not included) Back of DVD/VCR PC/VGA CONNECTION VGA cable (Not included) PC Audio cable (Not included) Use VGA cable and Audio cable (not included) to connect the unit with TV or PC, and use this product as a monitor.
SCART CONNECTION SCART cable (Not included) Back of DVD/VCR COAXIAL CONNECTION Use coaxial cable (not included) to connect the unit with amplifier or other audio decoding devices for coaxial audio signal output.
AV (COMPOSITE VIDEO) CONNECTION For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable (not included) to connect the unit with other devices.
USB CONNECTION Insert an USB memory device (not included) to playback MOVIE / MUSIC / PHOTO / Multimedia files. INSERT CI CARD Insert your CI card (Conditional Access Module) to watch special digital channels in your area. CONNECT EARPHONE TO THE UNIT Earphone cable (Not included) MAKE SURE ALL THE EQUIPMENTS AND POWER CORDS ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE OPERATION.
BASIC OPERATIONS - Press POWER button on unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red). Press SOURCE button on unit top or remote control to set the unit in DTV or TV mode. SELECT DESIRED PROGRAM - Press CH+ button to play next channel. - Press CH- button to play previous channel. - Press number buttons on remote control directly to select wanted program.
NOTE: If there’s no signal, pressing ASPECT button will not work. And the available video size may be different in different input sources. MULTIAUDIO SETTING - Press AUDIO button on remote control to enter Multi-Audio menu page. - Press LEFT/RIGHT navigation buttons to select the available soundtrack. - Press UP/DOWN navigation buttons to select the available audio language. NOTE: To enable this function, make sure that the channel you are viewing supports multi-audio languages.
FAVORITE LIST When viewing an available channel, press FAV button on remote control to enter Favorite List menu page. - Press UP or DOWN navigation buttons to select preferred channel. - Press LEFT/RIGHT navigation buttons to select preferred favorite group. - Press OK button to confirm the selection. NOTE: To add/remove a channel from Favorite List, please see Favorite Management on page 29. Press RED button on remote control to display the keyboard.
MEDIA PLAYBACK - Press SOURCE button on the TV or the remote control to set the TV in MEDIA mode. - Insert a USB memory device before following operations. - Press UP/DOWN/LEFT/RIGHT navigation buttons to move the cursor. - Press EXIT button to return to previous menu page. NOTE: You can press MEDIA button on the remote control to enter MEDIA mode directly. 1. PHOTO Press LEFT/RIGHT navigation buttons to select Photo in the main menu and press OK button to enter.
- Use navigation buttons to select preferred file. Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No to cancel this operation. Press GREEN button to add/remove all the files from play list. Press OK button to add/remove highlighted file from play list. Press button to start playing. During photo normal playing: - Press OK button on remote control to display the tool bar; press EXIT button to hide it.
- No to cancel this operation. Press GREEN button to add/remove all the files from play list. Press OK button to add/remove highlighted file from play list. Press button to start playing. During music playing: - 20 Press LEFT/RIGHT navigation buttons to select preferred option in the tool bar and press OK button to confirm selection/enter submenu. Press BLUE button on remote control to close the on-screen display; press any button on remote control to display it again.
3. MOVIE Press LEFT/RIGHT navigation buttons to select Movie in the main menu and press OK button to enter. - Use navigation buttons to select preferred file. Press RED button to enter a dialog box, and select Yes to delete highlighted file; select No to cancel this operation. Press GREEN button to add/remove all the files from play list. Press OK button to add/remove highlighted file from play list. Press button to start playing.
4. E-BOOK - Press LEFT/RIGHT navigation buttons to select e-Book in the main menu and press OK button to enter. - Use navigation buttons to select preferred file. Press RED button to enter a dialog box, and select YES to delete highlighted file; select No to cancel this operation. Press GREEN button to add/remove all the files from play list. Press OK button to add/remove highlighted file from play list. Press button to start playing.
- Press BLUE button on remote control to display the play list. Press button on remote control to play previous page. Press button on remote control to play next page. NOTE: To play your multimedia files, make sure you have selected corresponding icon in the main menu of MEDIA PLAYBACK. That is to say, you can only play Photo files in PHOTO item and play audio file in MUSIC, etc. MAIN MENU There are different setting menus.
Setup 2 - Press UP/DOWN navigation buttons to select the country that you are living in. Press OK button to confirm the selection and go to next page. Setup 3 - Press UP/DOWN navigation buttons to select desired menu language. Press OK button to confirm the selection and go to next page. Setup 4 - Press UP/DOWN navigation buttons to select desired auto power off time. Press OK button to confirm selection and go to next page.
DTV MODE Press SOURCE button on the TV or remote control to select DTV input source. 1. Picture 1.1 Picture Mode Available options: Standard, Mild, User, Dynamic. 1.2 Brightness The brightness value of picture can be adjusted from 0-100. 1.3 Contrast The contrast value of picture can be adjusted from 0-100. 1.4 Sharpness The sharpness value of picture can be adjusted from 0-10. 1.5 Colour The color saturation value of picture can be adjusted from 0-100.
1.8 Aspect Ratio Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred option. Available options: Auto, 4:3, 16:9, Zoom1, Zoom2. NOTE: If there’s no signal, pressing ASPECT button on remote control will not work. And the available video size may be different in different input sources. 1.9 Noise Reduction This item is used to eliminate the image noise to gain better image effect. Available options: Off, Low, Middle, High. 2. SOUND 2.
2.6 AVL (Auto Volume Level) This item is used to turn on/off AVL function. 2.7 SPDIF This item is used to select desired SPDIF audio output type. Available options: Off, PCM, Auto. 3. CHANNEL 3.1 Channel Management Press UP/DOWN navigation buttons to select this item and press OK or RIGHT navigation button to enter submenu.
Press UP/DOWN navigation buttons to select preferred program. a) Press RED button on remote control and use number buttons to input the password if “Lock Channel” is on. Then press RED button to add/remove a delete mark on highlighted program. After that, press MENU button to enter a dialogue box. Select OK to delete it; select Cancel to cancel this operation. b) Press GREEN button on remote control and use number buttons to input the password if “Lock Channel” is on.
3.2 Favorite Management Press UP/DOWN navigation buttons to select preferred program. a) Press RED button on remote control to add/remove highlighted channel to Favorite 1 list. b) Press GREEN button on remote control to add/remove highlighted channel to Favorite 2 list. c) Press YELLOW button on remote control to add/remove highlighted channel to Favorite 3 list. d) Press BLUE button on remote control to add/remove highlighted channel to Favorite 4 list. 3.
To exit auto tuning, press MENU or EXIT button and select OK in the menu. 3.6 DTV Manual Search When TV Connection is Air: a) Channel - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred program b) Frequency (KHz) - Press OK or RIGHT navigation button to enter submenu. - Press LEFT/RIGHT navigation buttons to move the cursor; press number buttons on remote control to input desired value.
C) Bandwidth (MHz) - Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred bandwidth. When TV Connection is Cable: a) Frequency (kHz) - This item is not user adjustable. b) Symbol Rate (KS/s) - Press OK or RIGHT navigation button to enter submenu. - Press LEFT/RIGHT navigation buttons to move the cursor; press number buttons on remote control to input desired value.
3.7 ATV Manual Search (for ATV input source only) 3.7.1 Current Channel Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred program. 3.7.2 Frequency This item is not user adjustable. 3.7.3 Search This item is used to start searching. 3.7.4 Fine Tune Press OK or RIGHT navigation button to enter submenu and press LEFT/RIGHT navigation buttons to fine tune it. 3.7.
4. Feature 4.1 Lock - Press OK or RIGHT navigation button to enter submenu. Input the password using number buttons on remote control. Press UP/DOWN navigation buttons to select preferred item. NOTE: The factory default password is “0000”. 4.1.1 Lock Channel This item is used to turn on/off Lock Channel function. 4.1.2 Parental Guidance Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred option. Available options: Off, from 4 to 18.
4.1.3 Change PIN Code - Press OK or RIGHT navigation button to enter submenu. - Input the Old Password, New Password, and Confirm New Password. After that, the new password will be saved automatically. 4.2 Language Press OK or RIGHT navigation button to enter submenu. Then select preferred OSD menu language, subtitle language, audio language, and DTV/ATV Teletext language using navigation buttons. 4.3 Clock - - Press OK or RIGHT navigation button to enter submenu.
4.3.3 Time Zone Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred value. 4.3.4 DST (Daylight Saving Time) This item is used to turn on/off DST function. 4.4 Sleep Timer This item is used to set the automatic sleep time in standby mode. Available options: Off, 10 Min, 20 Min, 30 Min, 60 Min, 90 Min, 120 Min, 180 Min, 240 Min. 4.5 Auto Power Off This item is used to set the Auto Power Off time. Available options: Off, 1 Hour, 2 Hours, 4 Hours. 4.
5. Setup 5.1 OSD Timer Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation buttons to select preferred option. Available options: 5/10/15/20/25/30 Seconds and Never. 5.2 Auto SCART This item is used to turn on/off Auto SCART function. If Auto SCART is on, you can view the programs by SCART automatically when SCART cable (not included) is connected. 5.3 PC Setup (for PC input source only) This item is adjustable only with PC input signal. 5.
ATV AND OTHER MODES - Press SOURCE button on the TV or remote control to select desired input source. For menu operations in these modes, please refer to the menu operations of DTV mode. PC MODE - - Connect a personal computer to the TV. Power on your computer and the TV. Press SOURCE button on the TV or remote control to select PC input source. Press MENU button to display the main menu. Select Setup using UP/DOWN navigation buttons. Then press OK or RIGHT navigation button to enter submenu.
4. Phase This item is used to adjust the picture apply to the TV. Available range: 0 to 100. 5. Clock This item is used to adjust the signals transfer speed. Available range: -50 to +50. NOTE: For Picture, Sound, Feature, and Setup menus, please refer to the menu operations of DTV mode.
MAINTENANCE Be sure to press POWER button to set the player to the standby mode and disconnect the AC adaptor before maintaining the player. Wipe the player with a dry, soft cloth. If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
WALL MOUNTING Contact a professional for assistance when wall mounting your TV. We are not responsible for any damage to the product or injury to yourself, if you mount the TV on your own. Do not wall mount the TV while TV is turned on. It may cause personal injury due to electric shock. Use standard M4 screws (10 mm / 4 pieces) to mount this TV.
TV STAND INSTALLATION GUIDE Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below. Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged. Step 2 Align the stand and TV, and then force the end of stand until the TV is fully seated on the stand. NOTE: Make sure the orientation of trapezoid head on stand is corresponding to the trapezoid slot on TV bottom.
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom Remedy No power Insert the power plug securely into the power outlet. No picture Ensure that the equipment is connected properly. ● No sound ● Distorted sound ● Ensure that the equipment is connected properly. ● Ensure that the input setting for the TV and stereo system are correct. ● Adjust the master volume to a suitable volume by pressing VOL+/VOL- button.
SERVICE PROCEDURE If you have reason for complaint, or your device is defective, please contact your dealer or the service division of JAY-tech GmbH to make arrangements for service procedures. Service Hours: Phone No.: Email: Monday - Thursday from 8:00 am to 5:00 pm Friday from 8:00 am to 2:00 pm. 02161 / 575 8950 info@jay-tech.de Please do not send your product to our address unless requested to do so by our service team. All costs and the risk of loss are the responsibility of the sender.
