Manual

WWW.JAYS-AUDIO.COM Page 4 of 10

CONNECTIONS

The connections of power cord, interconnect cables are located at the rear panel of the

CDT. For both safety and performance, please use quality cable from reputable suppliers.

i.e. Studio Grade cable, namely, Gotham / Sommercable / Mogami / Belden, etc.

Figure 1. CDT2-MK2 Rear Panel

(1) AC MAINS POWER SWITCH

Switch On/Off the unit by using the power switch. 0 denotes Off, 1 denotes On. There is no

standby function.

(2) AC MAINS POWER IEC SOCKET

The AC Mains is fitted with a mains fuse, rated at 1.6A, 5x20mm, Slow Blow. Replace the

fuse should the fuse blown with the spare fuse provided, or with the identical fuse rating.

Frequent fuse blown is considered a fault. Please contact us to investigate the issue further.

Connect the power cord to the AC Mains IEC inlet firmly.

(3) DIGITAL OUTPUT 16/44.1K

The CDT2-MK2 is equipped with four (4) Digital Output. From the Left to the Right:

 HDMI I2S (LVDS)

 ASE/EBU

 SPDIF – RCA

 SPDIF – BNC