User's Manual

- 26 - UDEE / UDRE - 332170A revision02Fr En De PRELIMINARY
4.2- Radio remote control start up
NB : If during this procedure, both UDEE transmitter indicator light begin flashing,
please contact the technical person in charge of the installation.
électronique
1- Switch ON the UDRE receiver.
2- Plug the UDB2 battery pack into UDEE transmitter housing.
(Take care that UDB2 battery pack is loaded and is well
connected to UDEE transmitter back.)
3- Install the electronic key on the transmitter or take care of
its presence on UDE transmitter.
4- Unlock the transmitter stop palmswitch button.
5- Press the green «On/Horn» button until the receiver is
started up.
6- Use the radio remote control to control the equipment.
electronic
key
To stop the radio remote control :
press the UDEE transmitter stop palmswitch button.
UDEE
transmitter
UDB2
battery pack