User's Manual

When the Pushup bar is charging, the battery symbol will be animated，And after being
charged, the battery symbol will be fully displayed. After touching, the Pushup bar will
wake up and the Back light will be on, battery symbol 100% fully charged
The battery status displayed on the screen is as follows:
More than 75 per cent Over 50 per cent Over 25 per cent
Below 25%
4-3.How to install the handle to the base.
1. Hold a handle in each hand and place the push-up handle vertically downward on the
base. It is recommended that the handles can be installed symmetrically on both sides
with any two holes on the left and right sides. Ensure that there has a handle on each
side. The spacing between the handles can be adjusted according to your needs.
2. Put the push-up handle vertically down on the base. If you hear a click sound, it
proves that the handle has been locked. If there is no click sound, turn left and right to
make a click sound, which proves that the handle has been installed.