User's Manual

• How to use Dumbbell
7-1. Start the dumbbell
(1)Press the button of - or + on the base to activate the dumbbell.
(2)The screen displays icon，reminding you that you need to connect to
the JAXJOX application.
7-2. The unit settings
Press and hold either the [+] or [-] button for two seconds, then enter into the weight unit
setting interface, the unit icon [LB] or [KG] in the upper right corner flashes, press the [+] or
[-] button to switch the unit,
and it will automatically determine if there is no operation for a short time.
7-3. Setting up the weight
• Press 【+】or【-】to choose the desired weight for your workout..
The device can be adjust from
8lb（3.6kg）— 14lb（6.4kg）— 20lb （9.1kg）— 26lb（11.8kg ）— 32lb （14.5kg）—
38lb（17.2kg）— 44lb（20kg）50lb（22.7kg)
• The Dumbbell connect takes approximately 3 seconds to change to your
selected weight. The weight loading animation plasy while the weight is
adjusting. Do not move the Dumbbell connect while it is adjusting.
• The Dumbbell will beep once when ready for use.