User's Manual

Configuration
Configuring HPT435
Power supply requirements
19www.javad.com
2.6. Configuring HPT435
1. Connect the computer and HPT 435, as described in “Connecting HPT435 and Computer”
on page 18. Turn on the HPT 435.
2. Start ModemVU.
3. Select the HPT435 (Figure 2-5), and click OK:
Figure 2-5. Options window
4. Select the COM port the HPT435 modem is connected to (Figure 2-6). Click Connect.
Figure 2-6. Connect to ModemVU
5. On the Radio Link tab, set the following parameters (Table 2-1) and click Apply (Figure 2-
7 on page 21).