User's Manual

Configuration
Configuring HPT435
Power supply requirements
17www.javad.com
2.2. Configuring HPT435
ModemVU is JAVAD GNSS’s configuration utility for external modems and modems embedded
in JAVAD GNSS modems. ModemVU provides the following functions:
• Connecting a computer to an UHF modem via a serial port.
• Displaying information about the radio modem installed in the modem.
• Programming the radio modem’s settings.
• Loading the new modem firmware.
See the ModemVU Software Manual available on the JAVAD GNSS website for details on
configuring the UHF modem. To configure the HPT435 modem, have the following ready:
• Computer running Windows®;
• ModemVU Software installed on the computer;
• A serial cable.
2.3. Installing ModemVU
ModemVU
TM
is a Windows® application is a configuration program for the radio modem.
ModemVU is available from the JAVAD GNSS website.
Note: Refer to the ModemVU Software Manual for full details on installing and using ModemVU
Software.
1. If downloading the program from the website, extract the program files into a folder on
your hard drive.
2. Navigate to the location of the ModemVU program and double-click the Setup.exe icon.
3. Follow the on-screen installation instructions. Click Next to continue, Back to get back to
previous step, or Cancel to quit the installation.
4. Keep the default installation location or select a new location.
5. Click Finish to complete the installation.
6. If desired, create a shortcut on the computer’s desktop for quick access to ModemVU.
To uninstall ModemVU use the Start menu on your computer:
1. Navigate to the location of the ModemVU program and double-click the Setup.exe icon.
2. Follow the on-screen installation instructions.