Use Manual

Configuration
Connecting HPT104BT and Computer
Connecting through Bluetooth®
18 www.javad.com
2.4.3. Connecting through Bluetooth
®
Note: Do not forget to attach the Bluetooth
®
antenna to Bluetooth antenna connector on the back panel of the
modem.
The HPT104BT modem contains Bluetooth
®
wireless technology that allows synchronization between
the modem and any other external device that supports Bluetooth
®
wireless technology; for example, an
IPAQ, or a computer with USB-to-Bluetooth
®
adapter or PCMCA-to-Bluetooth
®
adapter installed, etc.
HPT104BT and external device connection procedure varies slightly depending on the type of external
device used. In general, the connection procedure is as follows:
Note: Refer to your Bluetooth
®
-enabled external device documentation for more detailed connection
information.
1. Turn on a Bluetooth
®
-enabled external device and your receiver. The default external device
mode is Master; the modem’s Bluetooth
®
module mode is Slave.
2. Instruct the external device (Master) to search for the modem (Slave).
3. Once the Master device detects the modem, use the procedure described in the external device’s
documentation to connect it with the modem.