User's Manual

Page 9
3 Managing CPE Device
JT8500D/H is a user-friendly LTE CPE, and very easy to configure and setup. Subscribers
can just connect the device to their computer or home switch/router and the device is ready
to provide Internet Services.
 WEB Login
It is a preferred to setup the CPE using a Web browser from a local PC connected to device
LAN port. The user should ensure that the connected PC have acquired IP address via DHCP
from the device. After IP connectivity is established between the PC and CPE device, the
user may launch a Web browser and specify http://10.1.1.1 in the address bar. A window will
pop up requesting password. Input the user or administrator login password and then click
the “Log in” button. After successful log on, the default home page will appear. Note the
default user & administrator passwords are “user123” and “admin123” respectively.
4 LTE Configuration
 Overview
Once the user is logged in, the following window device status window will be prompted for
viewing. It contains both the system information, networking and device information
configured for the device.