User's Manual

Page 8
2 LED Display
Type
LED
Function
Description
ODU
PWR
Power indicator
Solid Blue – Device is power on.
SYS
System run indicator
Solid Blue – Device is in normal operation.
SIM
SIM card indicator
Light is on – SIM card state is ready,
Blinking Blue – SIM card is error.
LINK
LAN port status
Solid Blue – LAN port is up.
ACT
LAN port status
Blinking Blue – LAN data transmission.
RF
(5LEDs)
RF Signal Strength
5 level signal strengths indication by 5 Blue
LEDs.
1st Blue LED: -115dBm < RSRP
2nd Blue LED: -115dBm <= RSRP < -105dBm
3rd Blue LED: -105dBm <= RSRP < -95dBm
4th Blue LED: -95dBm <= RSRP < -85dBm
5th Blue LED: -85 <= RSRP
 RF Signal Adjustment
After the CPE outdoor unit has installed, the direction of antenna’s azimuth and pitch angle
needs to adjust for the best signal strength. In near line of sight condition, the CPE will have
the best signal when the antenna is directly pointing the base station.
User can adjust the holder to change the direction and angle of the antenna while observing
the RF LED on the outdoor unit which indicates the signal strength.