User's Manual

Page 14
5 Network Configuration
 Internet
This section allows user to configure the CPE operation mode, device name, MTU and etc.
The CPE default Operation Mode is Router, and the LAN PC connected to device LAN port will
obtain IP address via DHCP server of the device. The default MTU Size is 1500, user can
modify the MTU Size if necessary.
Note when setting the connection mode as L2 Bridge or L3 Bridge, there will be a
warning window pops up. Remember the management IP address 192.168.0.1 and click
the “ok” button.
When the user wants to manage the home page again, the PC should be configured a
static IP address as 10.1.1.X manual in order to visit the CPE managing page
http://10.1.1.1.