JASSFERRY Kitchen Sink Installation Guide Any questions, please contact our CUSTOMER SERVICE TEAM: jassferry@163.com / jassferry@qq.com www.jassferry.com / www.jassferry.co.
Tools needed Safety Goggles Drill Silicone Adhesive Jig Saw Phillips Screwdriver Putty Knife Tape Measure Pencil Scissors Screwdriver NOTE: Specialized tools may be necessary to install stainless steel topmount sinks with countertop materials. Make sure you have all necessary parts by checking the diagram. If any part is missing or damaged, please contact CUSTOMER SERVICES for a replacement.
Dimensions: Model Number: KB-332 2 S
Installation · Check the cut-out template against the actual sink to ensure a proper sized cut-out · Place the cut-out template in the desired location on the countertop · Trace template on countertop with a pencil te pla m e T r pe Pa · Cut the opening in the countertop by carefully following the traced line
Topmount / Undermount · · · · · Attach mounting hardware to the prongs protruding from the underside of the sink rim. Make sure the hooked side of the mounting clip is facing away from the sink.
Connections · Connect drain to sink, connect trap to drain. · Connect water supply connections to faucet accourding to manufacturer's instructions. · Run water into sink and check for the leaks. Maintenance Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the sink.
