Installation Guide

1 piece of backrest

Assembly Instructions

Item No.: 8726

1 piece of chair base

Assembly System

Parts and

hardware

1.Take out the chair backrest(A) from chair base(B).Place the chair base(B) face down on a clean, non-marring

surface.

2.Connect the backrest plug(B) to the chair base plug(A).Make sure all parts are connected and securely locked

into position.

Disassembly Instruction

● Open the flap on the backrest(B), use a screwdriver pressing outward on the metal ear on

the preattached metal bracket on one side of the chair base(A).

● Keep the chair base(A) in place, pull the backrest(B) upward at the same time, repeat the

same step for another side.

PAGE 1
Assembly Instructions Item No.: 8726 B Parts and hardware 1 piece of chair base 1 piece of backrest Assembly System 1.Take out the chair backrest(A) from chair base(B).Place the chair base(B) face down on a clean, non-marring surface. 2.Connect the backrest plug(B) to the chair base plug(A).Make sure all parts are connected and securely locked into position.
PAGE 2
Warning ●Do not allow children to play on the recliner. ●Always leave the recliner in an upright and closed posi on a er use. ●Keep hands and feet clear of the footrest mechanism and any gaps. ●Don't sit on the armrests of the recliner. User Instructions To get into the recline position: ●Sit in and pull the lever on the outside of right armrest. ●Use your body weight and push backwards into the seat into a fully reclined position.
PAGE 3
To move the chair back into the upright : ● Tilt your body weight slightly forward and upwards. ● The backrest will come up to an upright position. ● Use your feet to push the footrest down. ● The chair will automatically lock when it is in the fully upright position.