Installation Guide

1 piece of chair base 1 piece of backrest 2 pieces of backrest ears

Assembly Instructions

Item No.: 9318

Assembly System

Parts and

hardware

B C

Disassembly Instruction

➊ Take out backrest ears(C) from chair backrest(B).

➋ Open the flap on the backrest(B), use a screwdriver pressing outward on the metal ear on the preattached metal

bracket on one side of the chair base(A).

➊ Take out the chair backrest(B) from chair base(A). Place the chair base(A) face down on a clean, non-marring surface.

➋ Connect the backrest plug(B) to the chair base plug(A).

➌ Connect beckrest ears(C) to chair backrest(B). Make sure all parts are connected and securely locked into position.

bracket on one side of the chair base(A).

➌ Keep the chair base(A) in place, pull the backrest(B) upward at the same time, repeat the same step for another side.

PAGE 1
Assembly Instructions Item No.: 9318 A B C Parts and hardware 1 piece of chair base 1 piece of backrest 2 pieces of backrest ears Assembly System ➊ Take out the chair backrest(B) from chair base(A). Place the chair base(A) face down on a clean, non-marring surface. ➋ Connect the backrest plug(B) to the chair base plug(A). ➌ Connect beckrest ears(C) to chair backrest(B). Make sure all parts are connected and securely locked into position.
PAGE 2
Warning ●Do not allow children to play on the recliner. ●Always leave the recliner in an upright and closed posi on a er use. ●Keep hands and feet clear of the footrest mechanism and any gaps. ●Don't sit on the armrests of the recliner.
PAGE 3
To move the chair back into the upright : ● Tilt your body weight slightly forward and upwards. ● The backrest will come up to an upright position. ● Use your feet to push the footrest down. ● The chair will automatically lock when it is in the fully upright position.