SDS

03/02/2021Revision:
Page: 4 of 9
JASCO PREMIUM PAINT & EPOXY
REMOVER
SAFETY DATA SHEET
08/06/2018Supersedes Revision:
Precautions To Be Taken in
Storing:
Do not spread this product over large surface areas because fire and health safety risks
will increase dramatically.
Store in a cool place in original container and protect from sunlight. Exposure to high
temperatures or prolonged exposure to sun may cause can to leak or swell. Do not store
near flames or at elevated temperatures.
Keep container tightly closed when not in use.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Recommended Exposure LimitsCAS # Chemical Name Jurisdiction Notations
ACGIH TLV
616-38-6 Dimethyl carbonate
TLV: 500 ppm
STEL: 750 ppm
OSHA PELs PEL: 1000 ppm
ACGIH TLV
1330-20-7 Xylene (mixed isomers)
{Benzene, dimethyl-}
TLV: 100 ppm
STEL: 150 ppm
OSHA PELs PEL: 100 ppm
STEL: 500 ppm/(10min)
CEIL: 300 ppm
ACGIH TLV
100-41-4 Ethylbenzene
{Ethylbenzol; Phenylethane}
TLV: 20 ppm
STEL: 125 ppm
OSHA PELs PEL: 100 ppm
ACGIH TLV
98-82-8 Cumene {Benzene,
1-Methylethyl-; Isopropylbenzene}
TLV: 50 ppm
OSHA PELs PEL: 50 ppm
ACGIH TLV
67-56-1 Methanol {Methyl alcohol;
Carbinol; Wood alcohol}
TLV: 200 ppm
STEL: 250 ppm
OSHA PELs PEL: 200 ppm
ACGIH TLV
110-91-8 Morpholine {Diethylene
imidoxide}
TLV: 20 ppm
OSHA PELs PEL: 20 ppm
Respiratory Equipment
(Specify Type):
Eye Protection:
Protective Gloves:
Other Protective Clothing:
For use in areas with inadequate ventilation or fresh air, wear a properly maintained and
properly fitted NIOSH approved self-contained breathing apparatus or powered air
supply respirator or loose fitting hood.
For OSHA controlled work places and other regular users - Use only with adequate
ventilation under engineered air control systems designed to prevent exceeding the
appropriate TLV.
A dust mask does not provide protection against vapors.
Chemical goggles, or face shields are recommended to safeguard against potential eye
contact, irritation, or injury. Chemical goggles or face shields are recommended when
splashing or spraying of chemical is possible. A faceshield provides more protection to
help reduce chemical contact to the face and eyes.
Wear gloves with as much resistance to the chemical ingredients as possible. Laminate
film gloves offer the best protection. Consult your glove supplier for additional
information. Gloves contaminated with product should be discarded and not reused.
Various application methods can dictate use of additional protective safety equipment,
such as impermeable aprons, etc., to minimize exposure. Before reuse, thoroughly
Licensed to W.M. Barr and Company
GHS format