SDS

08/06/2018Revision:
08/06/2018Printed:
Page: 5
JASCO PREMIUM PAINT & EPOXY
REMOVER
SAFETY DATA SHEET
07/17/2018Supersedes Revision:
Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
Use only with adequate ventilation to prevent buildup of vapors. If the work area is not
well ventilated, DO NOT use this product. Do not use in areas where vapors can
accumulate and concentrate, such as basements, bathrooms or small enclosed areas.
Whenever possible, use outdoors in an open air area. If using indoors open all windows
and doors and maintain a cross ventilation of moving fresh air across the work area. If
strong odor is noticed or you experience slight dizziness, headache, nausea or
eye-watering -- STOP -- ventilation is inadequate. Leave area immediately and move to
fresh air.
Engineering Controls
(Ventilation etc.):
Wash hands thoroughly after use and before eating, drinking, or smoking.
Do not eat, drink, or smoke in the work area.
Facilities storing or handling this material should be equipped with an emergency
eyewash and safety shower.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
> 99.90 F
Autoignition Pt:
No data.
Flash Pt:
74.00 F Method Used: Setaflash Closed Cup (Rapid Setaflash)
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
1.001 - 1.025
Density:
8.330 - 8.530 LB/GL
Opaque viscous, aromatic odor
Appearance and Odor:
Vapor Pressure (vs. Air or
mm Hg):
No data.
Vapor Density (vs. Air = 1):
No data.
Evaporation Rate:
< 1 (BuAC=1)
Solubility in Water:
No data.
Appreciable
Solubility Notes:
Percent Volatile:
97.08 % by weight.
VOC / Volume:
48.8700 % WT
Viscosity:
> 250 cSt
10. STABILITY AND REACTIVITY
Stable
Conditions To Avoid -
Instability:
Unstable [ ] Stable [ X ]
Stability:
Bases, oxygen, sodium, potassium, strong oxidizers, reactive metals, strong acids
Incompatibility - Materials To
Avoid:
Carbon monoxide, carbon dioxide
Hazardous Decomposition or
Byproducts:
Will occur [ ] Will not occur [ X ]
Possibility of Hazardous
Reactions:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format