USER GUIDE

Entering a Call-For-Fire

VBS3Fires v3.6.3 User Guide

Image 7.23 Naval Third Transmission

7.1.7.17 Adjustments Panel

After a fire mission is carried out, at the third transmission panel, adjustments for Mission Type,

Target corrections, Ammunition selections and Method of Fire and Control can be made. Also it is

possible to request for reports by selecting Summit option. Add/Drop, Right/Left, and Up/Down

adjustments can be made to the previously fired mission. The ‘Change Method of Fire and Control’

section will have the default values selected according to the type of the mission conducted. For

example if an Adj mission was conducted, the Adjustment panel will have the default values set for

an Adj mission.

a. Right/Left. Number of meters to adjust the round to the right or the left of the last

impact. A positive number adjusts the round to the right, negative adjust the round

to the left.

b. Add/Drop. Number of meters to adjust the round away (over) or closer (short) of

the target. A positive number adjust the round over, negative adjusts the round

short.