USER GUIDE

VBS3Fires Scenario Design
403
VBS3Fires v3.6.3 User Guide
© SimCentric Technologies 2015
The format for the radioNets.dat file is as follows:
Image 24.1 RadioNet.dat file contents
Alternatively, the user can use the Radio Net Configurator to modify a radio net. To do this, go to
Radio and select the Radio Net Configurator. Then user can open the required radio net by clicking
the open button.
If the user wants to add a new radio net using Radio Net Configurator the user can click on the “Add”
button and give a name to the new radio net. Also user can set frequencies by clicking on the
“Freqs” button and add callsigns by editing the added radio net.
The edited or added radio net should save as “radioNets.dat” in the MPmission or myData
folder.