USER GUIDE

VBS3Fires After Action Review
267
VBS3Fires v3.6.3 User Guide
© SimCentric Technologies 2015
14.6 AAR Projectiles
During the AAR, VBS3Fires facilitates the visualisation of the trajectory of all rounds that were fired
during the period that the AAR was recording. These trajectory paths will record seamlessly with the
rest of the AAR.
During the AAR, projectile positions are recorded approximately every fifth of a second.
When the AAR playback is started, all of the projectiles that were fired in the scenario can be seen in
Projectiles panel. To open the panel, go to, Menubar  Analysis  Projectiles.
Image 14.9 AAR Projectiles
Un-checking the checkbox will hide the path for that projectile.
In this view all projectiles can be seen, whether or not they have been fired at that time in the AAR.
The table displays the Gun details, time of flight (TOF), ammunition type, max ordinate, time fired
and the grid reference (Target) of the impact point for the projectile.
This is a different projectile window to that which is visible while the VBS3 simulation is
running. It is, however, accessed from the same menu item.
The impact grid reference may not be visible in the case that the AAR recording was
stopped before the round impacted.