USER GUIDE

VBS3Fires After Action Review

262

VBS3Fires v3.6.3 User Guide

14 VBS3Fires After Action Review

VBS3Fires is seamlessly integrated with the VBS3 AAR functionality. The Instructor mode and the

Stand-Alone mode of VBS3Fires are both able to record and play-back after action reviews.

The VBS3Fires captures all the VBS3Fires round detonations and injects them into the VBS3 AAR at

the correct timings.

The general rule when operating the AAR in VBS3Fires is to:

 Record and save in VBS3Fires

 Load and playback though VBS3

VBS3Fires saves a separate VBS3Fires AAR file which stores additional information to the standard

VBS3 AAR file. For this reason, recording and saving of the AAR must be controlled through

VBS3Fires, so that it can manage the synchronization between VBS3Fires and VBS3 while recording.

AAR can now be started from VBS3 Real Time Editor (RTE). If it is saved from RTE, it prompts the user

to find the VBS3 AAR file. The AAR menu items are automatically updated based on the recording

status of an AAR. AAR has the ability to display the projectile path and to jump to particular

detonation time using the 'Fast Forward to Selected Detonation' button in the Projectile Analysis

table.

VBS3Fires will adjust the user interface to disable all menus which aren’t used by the VBS3Fires AAR

mode. It will re-enable these menus when VBS3Fires is connected to a live simulation scenario.