USER GUIDE
Records
232
VBS3Fires v3.6.3 User Guide
© SimCentric Technologies 2015
Length
Length of the target in meters (optional)
Width
Width of the target in meters (optional)
Source/ Accuracy
Target observed by, recommend Ammo fuse combination (optional)
Remarks
Additional comments (optional)
Altitude, Attitude, Length, Width, Source/ Accuracy and Remarks are optional values, which means
you might not get these values for some of the targets that recorded in the Battery Target
Worksheet panel.
13.3.1 Recording Targets by Instructor
Instructor can add targets, rename them and also delete them.
While recording targets, if any errors are included the Battery Target Worksheet panel indicates the
errors, so the instructor can fix the errors.
Instructor can notify trainees about the newly recorded targets.
13.3.1.1 Add
Follow the below mentioned steps to add a target to the Battery Target Worksheet panel.
1. Click Add Row. A new row will appear in the worksheet.
2. Type a name for Target.
3. Type the gird reference of the target position for Location. The alternative way to enter grid
reference is using (From Map button). Click it and then your mouse will be
automatically pointed on VBS3 2D map. Move your mouse pointer to the necessary position
on the VBS3 map and click. Now the grid reference of the location is entered to Location.
Image 13.3: A row in the worksheet
Typing values for Description, Altitude, Attitude, Length, Width, Socuce/Accuracy and
Remarks are optional steps.