USER GUIDE

Records
228
VBS3Fires v3.6.3 User Guide
© SimCentric Technologies 2015
13.1 FOs
FOs panel keep records of FOs participating in a VBS3 training scenario. This panel mainly helps
instructor of a training scenario to keep track FOs’ positions.
This panel is only available in the Instructor mode (Instructor terminal) and the Stand-alone mode of
the VBS3Fires application.
To open the panel, go to: Menubar Records FOs
The followings are recorded;
Field
Description
Station Name
The station name of the VBS3Fires application.
Callsign
The callsign of the FOs participating the VBS3 training scenario
Latest Grid
Grid of the latest position of a FO
Altitude
The altitude of the FO’s Latest Gird (this value is automatically
calculated)
Locstat
Grid of the position/ virtual position of a FO which was sent to a
Battery using Locstat. If an FO haven’t send locstat then this
Locstat value will be as same as the Latest Grid
Locstat Altitude
The altitude of the gird position shown in Locstat (this value is
automatically calculated)
Recorded
The simulation time when the location was last updated
Previous Records
Number of previous location updates an FO has sent
If more than one FO is loaded to the window, can select a FO as the main FO by selecting an FO and
clicking the “Set Main FO.
In a mission with the FO linked to the FO Link, the Instructor Mode of VBS3Fires can be run
without any trainees connected in order to carry out Fire Missions.