USER GUIDE

Transmit

213

VBS3Fires v3.6.3 User Guide

Using this window, enter the relevant call signs (FO and Batteries) and the new bearing in mils. Click

the ‘Transmit’ button to send the information.

Image 11.6 Line OT in Geographic View

11.4 Radio Transmission Free Entry

For any procedures that the system considers for the OT direction must be taken from

either Locstat or Line OT. Initially default Locstat is the FOs’ real position. Later user may give a

different Locstat value. Then if the user gives a different OT Line, system may have Locstat and OT

Line separately but for subsequent corrections or any points that direction is concerned will use the

latest value for the Locstat or OT Line. As far as the Geographic View GUI concerned, the virtual line

will be based on the latest OT direction (either from Locstat or OT Line) will be displayed. In the case

of OT Line consideration, the observers’ real position to the target distance will be considered for the

virtual OT Line distance.