USER GUIDE

FSCM

171

VBS3Fires v3.6.3 User Guide

Image 9.6 Specify height of a zone

3. Click Select Perimeter and then draw the perimeter of the zone in VBS3 2D map view (follow the

step 2 and 3 of the previous topic).

Now the zone is created. It is visible in both the 2D map view and the 3D view of VBS3. In the below

image, the zone on the right has a baseline height of 500 while other zones have zero baseline

height.

Image 9.7 Zones with different baseline heights