USER GUIDE

Entering a Call-For-Fire
142
VBS3Fires v3.6.3 User Guide
© SimCentric Technologies 2015
In order to activate the Coord Illum settings, it must be selected as the Type of Adjustment.
After enabling the Coord Illum settings, defining Illum rounds can be done by using the enabled
section.
 Guns - To select the number of guns where Illum and HE rounds should fire
 Interval - Time duration between each Illum round fired
 Delay – Time gap between the Illum rounds and the other rounds to be fired Adjust Fire or
Fire For Effect
After setting up the Coord Illum, click update and then click Execute on the ICP’s button panel to
carry out the Coord Illum mission.
7.4.6.1 Coord Illum Adjustment
Separate adjustments for Illum rounds and HE rounds can be provided in Coord Illum Adjustments
in the Fires Instructor Control Panel.
The logic of coord illum’s delay, is between the first illum and HE rounds. Which
means:- the time (T
he
- T
i
) between the start of the projectile of the first illum round (T
i
) and the
start of the first HE round (T
he
). Missions can also be carried out with one illum round and zero
HE rounds when firing from ICP.