USER GUIDE

Entering a Call-For-Fire

135

VBS3Fires v3.6.3 User Guide

Image 7.105 Adjustments

If an Instructor wants to process an adjustment, to an active fire task, select the battery entry of that

fire task and then click the ‘Adjust’ button. Then an ‘Adjustments’ window will be opened. Perform

the adjustments, and click ‘Adjust’ button. Then click ‘Add’ button to confirm the changes to the

battery entry. Polar adjustments can be achieved by adjusting the direction and distance values of

that had just been fired. Then the range (Distance) and direction are sent to the battery. The user

has to select the required serial which needs to be adjusted from the serial table and then do the

adjustments. The check fire button will stop all firing during multiple round missions. Button will

change to Cancel check fire, click to continue firing.

7.4.2 Mission Table

The mission table will consist of all the conducted fire missions in the specific VBS3Fires session.

Image 7.106 Mission Table

7.4.3 Serial Table

The serial table includes the details of the serials each fire mission has carried out. The Serial table

records will change the colour from green to red depending on the projectile analysis. Clicking on a