USER GUIDE

Entering a Call-For-Fire
125
VBS3Fires v3.6.3 User Guide
© SimCentric Technologies 2015
Image 7.89 Firing unit/ FO/ mission type
Image 7.90 Warning: No guns selected
The guns to be allocated in the fire mission can be selected by ticking the checkbox for the
respective gun, or else all the guns can be allocated by selecting the ’Select All’ option.
The users can enter the target location, altitude, and direction as preferred for the fire mission type
which could be a Grid, Polar, Shift or a Danger Close mission.
A validation is carried out for gun selection, if no guns are selected a warning message will
pop up.
When the mission details are entered, if the Direction field is specified it will be shown in
the serial table under direction. If no direction is entered then the serial table will get updated with
the default OT direction. When doing adjustments it should use the direction of the selected serial.