USER GUIDE

Entering a Call-For-Fire

VBS3Fires v3.6.3 User Guide

Image 7.39 Fire Schedule Worksheet

Now you need to set the hours when it should start firing the rounds. Click on “Set Hours” button

and set the “H Hour”. If you click “OK”, it will close the Set Hours panel.

Image 7.40 Set Hours panel and the H Hour

To edit the serial, click ‘Edit Serial’ after the serial is added. There are three ways to edit a serial. The

User may right click on the serial and select ‘Edit Serial’ or click on the ‘Edit Serial’ button on the

bottom of the Fire Schedule Worksheet which appears after selecting a particular serial or by double

clicking on a serial, will open up the Edit Serial panel.

The created fire serials can be copied and pasted in the same line or on to another line. The copied

serials can be pasted multiple times. For an example: copy a serial from the top line to the second

line when the user needs to do the same request to the second Battery as well. The pasted fire

serials can be edited. To copy a serial right click on the selected serial and select ‘Copy Serial’. In

order to paste a copied serial right click on the desired point on the time line and then select ‘Paste

Serial’.