USER GUIDE

Entering a Call-For-Fire

VBS3Fires v3.6.3 User Guide

7.3 Fire Schedule Worksheet

Image 7.30 Fire Schedule Worksheet panel

Fire scheduling lets the users to plan how a fire should occur for a set of fire serials over a predefined

time scale. The details for those serials can be loaded from Targets that have been already saved

using the Target list worksheet or the users can set those details as they wish at the time they create

a fire schedule.

To opon the Fire Schedule Worksheet, go to: Menubar Fire Mission  Fire Schedule Worksheet.

Each of the buttons is described as follows:

 Zoom- / Zoom+: used to zoom in and zoom out the serial table.

 Append Minutes: will append the minutes to the serial table.

 Trim minutes: will trim the minutes to the serial table.

 Time Line Length: will set length of the time line for the serial table ranging from minimum

of 10 to maximum value of 30.

 Set: the time line length value will be set.

 Add Line: will create an entry in the worksheet[Refer Image 7.33]

 Set Hours: will open the ‘Set Hours’ window

 Set FO: setting an FO to the fire serial

 Activate: creates a fire mission

 Check All: will pause all requested fire missions