Specifications

5 / 6
10、Appearance and construction ：
12.1 The integral structure shall meet the specified requirements for various uses,
and shall be heat-resistant, moisture-proof, earthquake-resistant and comply with
safety regulations.。
12.2 Cooling method, the nature cooling.
2.2 List of applicable FCC rules
FCC Part 15.247
2.6 RF exposure considerations
This module certified that complies with RF exposure requirement under 5mm RF distance.
2.8 Label and compliance information
FCC ID label on the final system must be labeled with “Contains FCC ID:
2A5MA-JX500” or “Contains transmitter module FCC ID: 2A5MA-JX500”.
2.9 Information on test modes and additional testing requirements
Contact Xiamen Janson Elec.Co.,Ltd will provide stand-alone modular transmitter test mode.
Additional testing and certification may be necessary when multiple modules are used in a host.
2.10 Additional testing, Part 15 Subpart B disclaimer
To ensure compliance with all non-transmitter functions the host manufacturer is
responsible for ensuring compliance with the module(s) installed and fully operational. For example,
if a host was previously authorized as an unintentional radiator under the Supplier’s Declaration of
Conformity procedure without a transmitter certified module and a module is added, the host
manufacturer is responsible for ensuring that the after the module is installed and operational the
host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may
depend on the details of how the module is integrated with the host, Xiamen Janson Elec.Co.,Ltd
shall provide guidance to the host manufacturer for compliance with the Part 15B requirements.