Instructions / Assembly

BURNER KNOB REPLACEMENT
BEFORE FIRST USE
CLEAN
• Remove any packaging and protective films.
• Remove any residue oil or grease from the manufacturing process:
COOKTOP: Wash the removable parts (Burner Grates, Griddle, Burner Caps and
Burner Heads) of the cooktop in a mild solution of warm water and liquid dish soap.
Dry thoroughly. Wipe the cooktop surface with a damp cloth and dry thoroughly.
Assemble the burner parts in the correct order. (See ‘COMPONENT PART ASSEM-
BLY’.)
OVEN: Wash the oven racks in a mild solution of warm water and liquid dish soap and
dry. Wipe down the interior of the oven and the Oven Rack Guides with a clean damp
cloth. Dry thoroughly before installing the parts. (See ‘COMPONENT PART ASSEM-
BLY’.)
(A) Standard Burner
Ignite HI – SIM
(B) Small 18” Oven
150-450
(C) Large 30” Oven
150-500 BROIL
A A A A
B C
AA A A
Some Gas Range models include an alternative set of Burner Knobs that can be
used to replace the original knobs based on personal preference.
2
1
To remove the original knobs,
pull firmly until the knob is
released from the control panel.
To attach replacement knobs,
align the hole of the knob with the
pin on the control panel and push
on firmly.
I
g
n
i
t
e
H
I
4
5
0
5
0
0
B
r
o
i
l
1
5
0
2
0
0
3
0
0
20