Full Product Manual
HOOD / COMPOSITE OVERLAY INSTALL
It is recommended that the unit be set under a powered, overhead, vented exhaust
hood of sufficient size and capacity.
LEVELING
The Front Panel at the base of the range can be removed by unscrewing to access the
4 adjustable legs. Adjust the range to desired height by rotating the legs clockwise to
raise and counterclockwise to lower. The range height can be raised 1.5” (40mm).
The bottom of the hood should be 30” minimum to 36” above the countertop. This
would typically result in the bottom of the hood being 67” to 73” above the floor.
These dimensions provide safe and efficient operation of the hood.
30" (762mm) min
36" (914mm) max
67" -73"
(1700mm)
(1852mm)
37"
938mm
30" (762mm) min
36" (914mm) max
67" -73"
(1700mm)
(1852mm)
Countertop Countertop
Metal HoodMetal Hood
WALL INSTALLATION
Wood/ Composite Overlay
ISLAND INSTALLATION
Wood/ Composite Overlay
37"
938mm
IMPORTANT: Due to the high power of the top burners, we do not recommend the use
of downdraft ventilation systems. A range hood with at least 450 CFM is advisable.
12










