Instruction Booklet

29
qwe
• Preparation for sewing
q Groove
w Pin
Attach the automatic buttonhole foot R. Make sure the
groove on the foot holder catches the pin on the foot when
lowering the presser foot.
e Button holder
r Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1.0˝
(2.5 cm) in diameter.
Use interfacing on stretch fabrics.
z Pull the button holder e to the back, and place the
button in it. Push it forward tightly against the button.
x Pull the buttonhole lever r down as far as it will go.
z
q
w
e
r
x
Automatic buttonhole
q Stitch pattern: 00
w Thread tension dial: 1 to 5
e Presser foot : Automatic buttonhole foot: R