Operation Manual

6
Pressure Dial
The pressure dial should be set at “3” for regular
sewing. Reduce the pressure to “2” for appliqué,
cutwork, drawn work, basting and embroidery.
Set the pressure to “1” when sewing chiffon, lace,
organdy and other fine fabrics. Velours and knits with
a lot of stretch may also require a “1” setting.
Pressure dial
Setting mark
To Raise or Drop the Feed Dog
• For button sewing, etc., drop the feed dog.
• After finished sewing, raise the feed dog.
The feed dog must always be up for normal sewing.
Lowered position
Raised position
(120V)
(A)
(240V)
(B)
Sewing Light
Nornally, the sewing light comes on when you turn on
the main switch.
However, if you prefer to have the sewing light off
while sewing, you can open the face plate and ac-
cess the bulb on/off knob.
Face plate
Switch knob
• To replace the light bulb
NOTE: Unplug the power supply before
changing the light bulb.
CAUSION: As the light bulb be HOT, protect your
fingers when you handle it.
(A) To remove........ Turn to the left.
To replace........ Turn to the right.
(B) To remove........ Push and twist to the left.
To replace........ Push and twist to the right.