Use and Care Manual
73
Cleaning the Hook Area
Clean the hook area at least once a month.
z Turn the power switch off and unplug the machine.
Remove the needle and presser foot.
Remove the setscrews on the needle plate with the
screwdriver supplied with the machine.
Remove the needle plate.
q Setscrews
w Screwdriver
CARE AND MAINTENANCE
e
e
r
u
t
y
r
x Take out the bobbin and bobbin holder.
e Bobbin holder
c Clean the bobbin holder with a lint brush.
Clean the feed dog and auto thread cutter device with
the lint brush.
r Lint brush
t Feed dog
y Auto thread cutter device
o
i
e
x
c
v
b
v Clean the hook race with a soft cloth.
u Soft cloth
b Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
Insert the bobbin.
Attach the needle plate, presser foot and needle.
i Knob
o Stopper
WARNING:
•Turnthepowerswitchoffandunplugthemachine
before cleaning.
•Donotdismantlethemachineinanywayother
than as explained in this section.
z
q
q
w