Instructions

UMG 604-PRO
www.janitza.de
71
Address Designation Setting range Unit Default
200 Device address, Modbus/Profi-
bus
1 to 255 - 1
201 Baud rate, RS232
0 = 9600Bit/s
1 = 19200Bit/s
2 = 38400Bit/s
3 = 57600Bit/s
4 =115200Bit/s
0 to 4 - 4
202 Baud rate, RS485
0 = 9600Bit/s
1 = 19200Bit/s
2 = 38400Bit/s
3 = 57600Bit/s
4 =115200Bit/s
5 = 921600Bit/s
0 to 5 - 4
203 RS485, mode
0 = Modbus RTU/slave
1 = Modbus RTU/master
2 = Gateway transparent
0 to 6 - 0
204 RS232, mode 0 to 6 0
0 = Modbus RTU/slave
3 = Debug
6 = SLIP
(for internal use only)
0 to 6 - 0
Address Designation Setting range Unit Default
205 DHCP mode
0 = static IP
1 = BootP
2 = DHCP client
0,1,2 - 2
300 IP address, xxx --- --- --- 0 to 255 - 000
301 IP address, --- xxx --- --- 0 to 255 - 000
302 IP address, --- --- xxx --- 0 to 255 - 000
303 IP address, --- --- --- xxx 0 to 255 - 000
304 IP mask, xxx --- --- --- 0 to 255 - 000
305 IP mask, --- xxx --- --- 0 to 255 - 000
306 IP mask, --- --- xxx --- 0 to 255 - 000
307 IP mask, --- --- --- xxx 0 to 255 - 000
310 IP gateway, xxx --- --- --- 0 to 255 - 000
311 IP gateway, --- xxx --- --- 0 to 255 - 000
312 IP gateway, --- --- xxx --- 0 to 255 - 000
313 IP gateway, --- --- --- xxx 0 to 255 - 000
Table Parameter list for bus settings
Table Parameter list for Ethernet settings