Tus neeg siv phau ntawv
Align pilot screw with arrow
located on fixture label
Align arrow of the lens
with pilot screw
Figure 2. Alignment of the Lens, Face Ring, Housing and Clamps for Pool White Lights
Use only the special pilot screw provided with this
underwater light. This screw mounts and electrically
grounds the housing securely to the mounting ring
and wet niche. Failure to use the screw provided
could create an electrical hazard, which could result
in death or serious injury to pool or spa users,
installers or others due to electrical shock.
WARNING
7. Ifpoolorspaisempty,llpoolorspauntilthe
underwater light is completely submerged in
water before operating the light for more than 10
seconds. Turn on main switch or circuit breaker, as
wellastheswitch,whichspecicallyoperatesthe
underwater light, to check for proper operation.
Never operate this underwater light for more than
10 seconds unless it is totally submerged in water.
Without total submersion, the light assembly will get
extremely hot, which may result in serious burns
or in breakage of the lamp or lens. This may result
in serious injury to pool or spa users, installers, or
bystanders or in damage to property.
WARNING
Page 7
ENGLISH
Jandy
®
Pro Series Underwater Pool and Spa White Lights
|
Operation Manual