Instruction Manual

ManualsBrandsJandy ManualsCheck ValveJandy Pro Series Spring Check Valve

Zodiac Pool Systems, Inc.

2620 Commerce Way, Vista, CA 92081

1.800.822.7933 | www.ZodiacPoolSystems.com

ZODIAC

is a registered trademark of Zodiac International, S.A.S.U., used under license.

All trademarks referenced herein are the property of their respective owners.

Flow

Direction

NOTE

For Replacement-

Before installing,

make certain that

the seal is not

displaced from

the flapper.

Check Valve Complete,

Part No. 7235, 1½” - 2”

Part No. 7305, 2” - 2½”

Part No. 7307, 2½” - 3”

Part No. 7511, 1½” - 2” - 90°

Part No. 7512, 2” - 2½” - 90°

Item

No.

Part No. Description

1 7056 Cover w/Flapper Assy.*

1 R0466000 Cover w/Flapper Assy. 2½”-3”*

2 1132 151 O-Ring 1½”-2” and 2”- 2½”

2 R0465700 241 O-Ring 2½”-3”

3 1298 #14 x 3/4 Valve Housing Screws

*(Includes Flapper Assembly, Pin Cover, Spring & O-Ring

MAINTENANCE

The clear cover allows inspection of the Check Valve operation.

If necessary, the valve can be disassembled and the o-ring and

valve body can be inspected for damage. The o-ring should be

thoroughly greased with silcone lubricant (MIL-S-8660) and the

valve reassembled.

IMPORTANT CHECK VALVE LOCATION

For optimal sealing performance, locate the Check Valve at

the lowest elevation possible in the plumbing. This allows

the weight of the water column to help seal the Check

Valve for a good seal. A minimum of 16” of water column

is recommended.

Flow

Direction

CHECK

VALVE

16”

Minimum

Recommended

180° Valve Housing

90° Valve Housing