XP Series™ Quick Start Guide Technology at Work.
XP Series Quick Start Guide Copyright 2011 Janam Technologies LLC. All rights reserved. XP Series, Janam and the Janam logo are trademarks of Janam Technologies LLC. Other product and brand names may be trademarks or registered trademarks of their respective owners. Janam Technologies LLC assumes no responsibility for any damage or loss resulting from the use of this guide.
Content and Additional Resources To help you get started with your XP Series mobile computer, this guide features: - Hardware Overview - Installing and Charging the Battery - Getting Started - Regulatory Information Contents of this guide are subject to change. For the most current version of this guide and additional product details visit, www.janam.com. For Palm OS® software updates and information, visit www.access-company.com.
Hardware Overview 1. Power 2. Indicator LED 3. LCD 4. Connector 5. Scan Trigger 6. Right Trigger 7. Left Trigger 8. Navigation 9. Home 10. Enter 11. Brightness/Contrast 12. Programmable 1 1 2 2 3 3 7 6 7 6 8 12 5 14 12 12 9 13. Function 8 14. Backspace 15. Alpha/Numeric Shift 16. Space 17.
Hardware Overview 9 7 10 5a/5b 6 Battery Compartment 8 12 4 3 1 2 1. Battery Door 2. Battery Screw 3. Reset 4. Microphone (XP30 Series) 5a. Speaker (XP30 Series) 5b. Buzzer (XP20 Series) 6. IrDA Window 7. Stylus 8. Stylus Slot 9. Lanyard Connector 10. Handstrap Screw Port 11. Handstrap Bar 12. MiniSD or MicroSD Card Slot* 11 * Check your XP product(s) and be sure to use the correct card type. Page 4 Janam│The right features. The right price.
Installing and Charging the Battery A. INSTALLING THE BATTERY 1. To access the battery compartment, turn the battery screw counterclockwise to open the latch and remove battery cover. 2. Position the battery-lift strap, place the Lithium-ion battery and snap into place. 3. Replace the battery cover by positioning the top prongs first and sliding cover into place. Tighten battery screw by turning clockwise. B.
Getting Started A. CALIBRATING THE SCREEN The first time the device is turned on, the Welcome Utility appears. To set up the device, follow the onscreen instructions using the stylus to tap the exact center of each target Note: If your XP Series device came pre-loaded with a custom software application, the Welcome Utility may not appear. B. ATTACHING THE HANDSTRAP To attach the handstrap, first align the two holes in the metal handstrap anchor at the two handstrap screw ports.
BARCODE SCANNING DEMONSTRATION SET-UP 1. 2. 3. 4. Tap the home button, and tap the Janam icon. Tap the barcode scanner demo (application menu) in the upper left corner of the screen to display the setup options. Three menus will appear (setup, OCR, options). After starting the demo application, a variety of options become available: » Beep sound: you can enable or disable the sound whenever a successful barcode or optional character recognition (OCR) occurs.
Getting Started The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive. For further information, please contact: Janam Technologies LLC 100 Crossways Park West, Suite 105 Woodbury, NY 11797 Janam Technologies shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
This Class B digital apparatus complies with the Canadian ICES-003. Cet appareil numerique de la Class B est conforme a la norm NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
RF, Regulatory and Safety Approvals Parameter Specification R&TTE EN 300 328 v1.6.1 (2004-11) EN 301 489-1 v1.6.1 (2005-09) EN 301 489-17 v1.2.1 (2002-08) EN 60950-1:2001+A11 EN 50371:2002 Australia AS/NZS CISPR 22:2004 Hereby, Janam Technologies LLC declares that this product is in compliance with the essential requirements and other relevant provisions of Directive, 1999/5/EC. The equipment is intended for use throughout the European Community.
Battery Warning CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Battery Safety Guidelines Use only Janam batteries and recharge batteries using only Janam approved charging accessories. Observe the following guidelines for safe use of Li-Ion batteries: 1. 2. 3. 4. 5. 6. Do not expose the battery to excessive heat or cold. Do not short-circuit. It may explode.
www.janam.com Technology at Work.
