Quick Start Guide

Important Note: The main (removable) battery charges the internal backup battery with or without an external
power source. When discharged, the backup battery requires approx. 1.5 hours to recharge.
Caution: All user data will be lost if the main battery is removed before the internal backup battery is properly
charged. It is recommended you check that the backup battery capacity is at 100% prior to removing the main
battery. To do this, access the Power Application located in Start->Settings-> Power. It is also recommended that you
rstsuspendthedevicepriortoremovingthemainbattery.
A. INSTALL THE BATTERY
1. Place the battery with the label side facing down.
2. Slide the battery into the compartment.
3. Firmly push the battery into place.
B. CHARGE THE BATTERY
To charge the battery using the USB Cable:
1. Connect the power supply to the USB cable.
2. Connect USB cable to USB type C Port (Hardware Overview #12).
3. Plug in the power supply. Use only easily accessible wall outlets that are easily reached with the length of supplied power cable.
To charge the battery using a Cradle Kit:
1. Connect the power supply to the cradle.
2. Plug in the power supply. Use only easily accessible wall sockets that are easily reached with the length of supplied power cable.
3. Placethedeviceincradle.TheLEDonthedevicewillilluminatetoconrmconnection.
4. The standard capacity battery is fully charged in approximately 4 hours.
5. To charge a battery in the spare battery well, insert the battery into the well top down and gently press
down.TheLEDlightonthecradlewillilluminatetoconrmconnection.
Getting Started
Janam Technologies LLC Page 5 XT3 Series Quick Start Guide