JAV-61 WARNING: Improper installation could result in damage to the amplifier. Read all instructions before installation.
Introduction The JAV-61 is a low noise, low distortion unity gain distribution amplifier for line level stereo audio and video baseband signals. It splits audio and video signals six ways with no signal loss. It prevents audio distortion in multiple zone systems by buffering the source units from the loading effects of several AV receivers or preamps. The space saving “flat pack” design allows great flexibility in mounting and positioning. JAV-61 panel description 1. INPUT jacks.
ZONED SYSTEMS One of the most useful applications of the JAV-61 is to drive several receivers or preamps from common sources in multiple zone A/V systems. Fig. 2 illustrates the use of four JAV-61’s to drive four receivers from four sources in a typical four zone system. FIG. 2 Zoned systems NOTE: 1. Use high quality low-loss cables for all A/V connections. For runs in excess of 10 feet, use lowloss coax. Runs in excess of 50 feet are not recommended. 2.
Specification: AUDIO Gain: Unity Input overload: 3.0 V RMS Input impedance: >20k Ohms (ea. input) Output impedance: <100 Ohms THD: 0.06%@1.0 V input level Freq.
