Instructions / Assembly

POLE SAWS
Remove wing nut and lock washer. Place
saw blade over bolt and mounting pin.
Replace lock washer
and wing nut, tighten.
Mounting
Pin
Wing Nut
Lock Washer
Snap pole saw into
pole’s ferrule.
Attach Saw Blade to Pole Saw Head
PS-3FP
With Mounting Pin
Wing Nut
Bolt
Carriage
Bolt
Wing Nut
Bolt
Remove wing nut, lock washer and car-
riage bolt nut. Place saw blade over bolt
and carriage bolt. Replace washer, wing
nut and carriage bolt nut.
PS-3F / PS-3
With Carriage Bolt
PS-3FP
Center Blade Mount with
Mounting Pin
Fits Saw Blades: SB-1C, SB-2,
SB-1T, SB-13TE, SB-16TE, SB-
16TE-W, SB-13TE-H
PS-3F
Center Blade Mount with
Carriage Bolt
Fits Saw Blades: SB-1C,
SB-13TE, SB-16TE, SB-16TE-
W, SB-13TE-H
PS-3
Offset Blade Mount with
Carriage Bolt
Fits: SB-2 and SB-4 Blades
Adapters Allow Quick and Easy Replacement of
Pruner Head or Pole Saw
Care For Saw Blades
Wipe down after use to remove
moisture and tree sap.
Lubricate to repel moisture and
prevent rust.
Base Pole Extension Pole