Instructions / Assembly

PH Pruners with Adapter
1. Using at head screwdriver & wrench,
remove screw and nut holding blade.
2. Place saw blade over blade bolt
on pruner and line up holes.
3. Secure saw blade to pruner with
screw and nut.
Attach Saw Blade to PH-11 Pruner
PH-11 Pruner accommodates
Jameson’s SB-1T Or SB-2 Teon
Saw Blade, offering the benet
of two tools in one.
Attach Adapter
Bolt Pruner onto Adapter then snap
Adapter into Jameson Pole.
Attach Rope
Tie rope end to chain pulley’s o-ring.
O-Ring
PH-12 Pruner does not
accommodate a saw
blade.
Adapter
Adapters Allow Quick and Easy Replacement of
Pruner Head or Pole Saw
Care For Pruner and Saw Blades
Wipe down after use to remove
moisture and tree sap.
Lubricate to repel moisture and
prevent rust.
Base Pole Extension Pole
HOLD PRUNER BY BASE - NOT BLADE OR HOOK