Installation Guide

Pruners & Pole Saws
Permanent Mount - No Adapter
Base Pole Extension Pole
JAPruners Permanently Mounted To Pole
Thread rope end over pulley and tie to
eyebolt on Adapter.
Attach Rope
Pole Saw Heads Permanently Mounted To Pole
Attach Saw Blade
Remove wing nut and lock washer. Place
saw blade over bolt and mounting pin.
Replace lock washer
and wing nut, tighten.
Mounting
Pin
Wing Nut
Lock Washer
Wing Nut
Bolt
Care For Pruner and Saw Blades
Wipe down after use to remove
moisture and tree sap.
Lubricate to repel moisture and
prevent rust.
HOLD PRUNER BY BASE - NOT BLADE OR HOOK