Installation Guide

CollarOuter
Lock
Fig.1
Fig.2
To Adjust Pole Length:
Unscrew threaded collar by turning until loose. (Fig. 1)
Unlock inner lock by twisting upper pole section counter-clockwise, approximately
quarter-turn, while holding lower pole section in place. (Fig. 2)
Extend poles to desired length.
To Lock Into Position:
Twist upper pole section clockwise, approximately quarter-turn, until inner lock
engages (there is an audible click).
Re-attach collar to outer lock, turning until completely secure.
Double Lock™ Telescoping Poles
Scan to Watch
Double Lock™ Video
Pole Must Be Locked Into Position Before Using