Replacement Part List
Hex Bolts
800.346.1956 WWW.JAMESONLLC.COM 803.222.6400
Since 1956
BUCKET MOUNT TOOL HOLDERS
BK_MO2
To Install:
1. Loosen both hex bolts with wrench
2. Slide bracket to full open position
3. Install scabbard over bucket lip
4. Slide bracket together so it clamps tightly
on bucket lip
5. Tighten both bolts
To Remove:
1. Loosen both hex bolts
2. Slide bracket to full open position
3. Remove scabbard
Bucket Tool Holders:
24-12A
24-12AH
24-15D
Slide Bracket To Full Open Position When Installing
or Removing To Prevent Damage
24-12A
Impact Tool Holder
Fits up to 4.5” Bucket Lip
24-12AH
Impact Tool Holder with Scabbard
Fits up to 4.5” Bucket Lip
Features two spare drill bit holders.
24-15D
Double Pocket Tool Holder
Fits up to 4.5” Bucket Lip
Warranty
Jameson products carry a warranty against any defect in material and workmanship for a period
of one year from date of shipment unless failure is due to misuse or improper application. Jame-
son shall in no event be responsible or liable for modications, alterations, misapplications or repairs
made to its products by purchaser or others. This warranty is limited to repair or replacement of the
product and does not include reimbursement for shipping or other expenses incurred. Jameson
disclaims any other express or implied warranty.