SDS

WLL-L0502
SAFETY DATA SHEET
LLL0502 v5.0
en/US
9. Physical and chemical properties
Appearance
Form: liquid Colour: grey
Flash point > 200
◦
F
Lower Explosive Limit Not applicable.
Upper Explosive Limit Not applicable.
Evaporation rate Slower than Ether
Vapor pressure of principal solvent 0.6 hPa
Water solubility appreciable
Vapor density of principal solvent (Air = 1) 0.6
Approx. Boiling Range 100
◦
C
Approx. Freezing Range 1000
◦
C
Gallon Weight (lbs/gal) 10.21
Specific Gravity 1.22
Percent Volatile By Volume 67.51%
Percent Volatile By Weight 55.20%
Percent Solids By Volume 32.49%
Percent Solids By Weight 44.80%
pH (waterborne systems only) No data available.
Partition coefficient: n-octanol/water No data available
Ignition temperature 201
◦
C DIN 51794
Decomposition temperature Not applicable.
Viscosity (23
◦
C) Not applicable. ISO 2431-1993
VOC* less exempt (lbs/gal) 1.0
VOC* as packaged (lbs/gal) 0.4
Does not sustain combustion.
* VOC less exempt (theoretical) and VOC as packaged (theoretical) are based upon the VOC of the packaged material at the point of
manufacture.
10. Stability and reactivity
Stability
Stable
Conditions to avoid
Stable under recommended storage and handling conditions (see section 7).
Materials to avoid
None reasonably foreseeable.
Hazardous decomposition products
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke,
oxides of nitrogen.
Hazardous Polymerization
Will not occur.
Sensitivity to Static Discharge
If heated above the flash point, solvent vapors in air may explode if static grounding and bonding is not used during transfer of this
product.
c
 2018 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
Copies may be made only for those using Axalta Coating Systems products.
5 - 9
2018-11-07