SDS
WLL-L0502
SAFETY DATA SHEET
LLL0502 v5.0
en/US
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
The following percentage of the mixture consists of ingredient(s) with unknown acute toxicity:
17.2 %
3. Composition/information on ingredients
Mixture of synthetic resins, pigments, and solvents as well as water
Components
CAS-No. Chemical name Concentration
13463-67-7 Titanium dioxide 4 - 15%
57-55-6 Propylene glycol 1 - 4%
14808-60-7 Quartz-crystalline silica 1 - 4%
41556-26-7 Bis(1,2,2,6,6-pentamethyl-4-piperidinyl) seba-
cate
0.0 - 1.0%
- Trade Secret Additive 0.0 - 1.0%
- Trade Secret Additive 0.0 - 1.0%
Any concentration shown as a range is due to batch variation.
4. First aid measures
Eye contact
Remove contact lenses. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Seek medical
advice.
Skin contact
Do NOT use solvents or thinners. Take off all contaminated clothing immediately. Wash skin thoroughly with soap and water or use
recognized skin cleanser. If skin irritation persists, call a physician.
Inhalation
Avoid inhalation of vapour or mist. Move to fresh air in case of accidental inhalation of vapours. If breathing is irregular or stopped,
administer artificial respiration. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a
physician.
Ingestion
If swallowed, seek medical advice immediately and show this safety data sheet (SDS) or product label. Do NOT induce vomiting.
Keep at rest.
Most Important Symptoms/effects, acute and delayed
Inhalation
May cause nose and throat irritation.
Ingestion
May result in gastrointestinal distress.
Skin or eye contact
May cause irritation or burning of the eyes. Repeated or prolonged liquid contact may cause skin irritation with discomfort and
dermatitis.
c
2018 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
Copies may be made only for those using Axalta Coating Systems products.
2 - 9
2018-11-07