Full Product Manual

123
General
Product
Information
Tools for
Cutting and
Fastening
General
Installation
Requirements
General
Fastener
Requirements
Finishing and
Maintenance
HardieTrim®
Boards/Battens
HardieWrap®
Weather Barrier
HardieSoffit®
Panels
HardiePlank®
Lap Siding
HardieShingle®
Siding
HardiePanel®
Vertical Siding
ESR-1844 &
2290 Report
Appendix/
Glossary
Working
Safely
HardieShingle
®
Siding
HardieShingle Staggered Edge Notched Panel Coverage
Panels are available in 48 in. lengths. Pieces needed for one square (100 sq. ft.) of product coverage = approximately
50, (depending on ratio of length to height of wall) based on maximum exposure of 6 in..
HardieShingle Straight Edge Notched Panels Coverage
Panels are available in 48 in. lengths. Pieces needed for one square (100 sq. ft.) of product coverage = approximately
43, (depending on ratio of length to height of wall) based on maximum exposure of 7 in..
HardieShingle Half-round Notched Panel Coverage
Panels are available in 48 in. lengths. Pieces needed for one square (100 sq. ft.) of product coverage = approximately
43, based on a maximum exposure of 7 in..
HardieShingle Individual Shingle Coverage*
Shingles are available in 4.2 in., 5.5 in., 6.75 in., 7.25 in. and 10 in. widths, Bundles needed for one square (100 sq.
ft.) of product coverage:
Shingle Width # of Bundles (5 in. Exp.) # of Bundles (7 in. Exp.) Pieces per Bundle (5 in. Exp.) Pieces per Bundle (7 in. Exp.)
4.2 in. 3 3 20 15
5.5 in. 6 6 20 15
6.75 in. 6 3 20 15
7.25 in. 6 6 20 15
10 in. 3 3 20 15
* Individual shingles are not available in all areas. Check you local dealer for availability.
HardieSoffit
®
Panels
• For 12 in. and 16 in. width soffits: Divide total lineal footage of soffit and/or eaves by 12.
• For 24 in. width soffits: Divide total lineal footage of soffit and/or eaves by 8.